Danfoss Heating - Heating Products
Heating Products - Heating - Water Heating - Floor Heating - Heat Metering
DSE Flex – Bespoke Substations
Created for optimal system performance, the Danfoss DSE Flex builds the latest technology into the compact substation to provide energy efficiency for indirect heating, domestic hot water, floor heating and air conditioning.
The DSE Flex substation delivers up to three circuits in one substation with the possibility to make combinations between modules if more circuits are required. Its capacity range is up to 550kW on heating and 590kW on domestic hot water (determined by temperature level, allowed pressure drop and local regulation).
It was designed in close co-operation with the district energy community to ensure it reached the primary criteria of: high energy efficiency, reliable operation, compact size, long-service life and easy specifications, installation & service. All the components equipped in the substation were especially chosen to meet these criteria and create a compact substation that provides an optimum system performance with a tidy, modern look of heating installation.
SonoSelect™ sets a whole new standard in heat metering. With a wide range of innovative and unique features, it is simple to install and commission, and delivers continuous high-performance measurements, even under harsh ambient temperature conditions.
One of SonoSelect’s key features is that all its advanced functionality can also be controlled via smartphone using the innovative SonoApp. Complex functions can easily be programmed and routine adjustments have been made faster to access and simpler to carry out.
Based on precision ultrasonic technology, the new SonoSelect™ heat meter delivers the level of accuracy and reliability to meet the most demanding energy management challenges.
A recent launch from Danfoss is their new fan-coil unit assembly: HERO Plant. It is a pre-fabricated flushing bypass arrangement for larger plant devices such as air handling units, heat exchangers and heater batteries.
It combines isolation, drain strain and a flushing bypass assembly with Danfoss’ AB-QM pressure independent control valve (PICV) to create a ready-to-install solution that saves time on site and eliminates the need for ‘hot works’ permits and the associated site safety concerns.
Available in DN15-150, the Danfoss HERO Plant is factory built under strict quality control conditions and supplied pressure tested to PED (Pressure Equipment Directive) standard. At the heart of the HERO Plant is the PICV which provides balance at full or partial loads whilst working with a variety of Danfoss actuators to optimise heating & cooling comfort and increase energy savings for building owners and occupants.
Among the key design features of the HERO Plant are: flow and return mounted drains for flushing & quick drain-downs, a strainer to prevent plant performance deterioration and components within the assembly that are installed to enable rotation should they clash with other pipework.
Creating optimal hydronic balance, simplifying flush and allowing measurement of water flow, the Danfoss HERO plant is a unique concept making life much easier.
Danfoss is leading a revolution in commercial heating and cooling control with the launch of the NovoCon® digital actuator. This multi-functional actuator now makes it possible to connect a HVAC system to the Building Management System (BMS) via Fieldbus – adding advanced levels of hydronic balancing and control, whist also saving valuable time on site.
The NovoCon® is a 4-in-one solution which combines a digital actuator, flow indicator, BMS communication device and data logger.
Designed for use with the Danfoss AB-QM pressure independent balancing and control valve (PICV), NovoCon® S simplifies the installation and commissioning process and gives users access to unique data for maintenance purposes. It also offers remote control of the heating and cooling system from a computer, for example, the ability to flush hundreds of valves with a single mouse click.