|
||||||||||||||||||||||||||||||||||||||||||
|
MonodraughtCool-phase (Passive Cooling & Heat Recovery)Cool-phase is Monodraught’s answer to mechanical air- conditioning systems (AC). Collaborating with The University of Nottingham, BASF Ltd, and the Carbon Trust, Monodraught has created an extremely low energy, intelligent passive cooling and heat recovery system for use within Commercial, Academic and Health Care environments. The main purpose of the Cool-phase system is to provide powered fresh air ventilation, but with the added capability of storing and discharging large amounts of latent thermal energy. The system incorporates a microencapsulated phase change material (PCM) slurry, which utilises latent thermal energy to allow for up to 4kWh of thermal storage, and supplying around 1kW of cooling at any one time. By passing the PCM through a series of precision engineered spiral wound heat exchangers, a significant temperature differential can be achieved as air is drawn through the system. This is all achieved using a fraction of the power required to run traditional AC systems, reducing carbon emissions and the detrimental effects, usually associated with AC. The main function of the Cool-phase system is to provide ventilation and each system, under automatic control, each system will provide a volume flow rate of approximately 300m³/h, which is sufficient to supply the fresh air requirements for 15 people. In addition to this the system is capable of providing approximately 1kW of cooling, and will provide a temperature differential in the region of 5ºC. In terms of power consumption, the system runs at a maximum 65W (average 40W). With a maximum cooling capacity of 1kW, the Coefficient of Performance (COP) equates to 15, which can be 5 times greater than that of the most efficient AC systems. Another positive factor is the low maintenance requirements, though the filter may need to be cleaned roughly every 12 – 24 months, this can be done by the end user without the need for a product specialist. The Cool-phase also does not require expensive and time consuming yearly maintenance, typically required by AC systems. Though the PCM will require replacing at the end of its 10 year life span, this can easily be carried out utilising the inbuilt pump. iNVent (Intelligent Natural Ventilation Control)The iNVent system is a natural ventilation management system for up to 4 Zones of Sola-boost or Windcatcher systems. Utilising a seasonally adjusted proportional control based on temperature and CO2. Designed specifically for the control of natural ventilation systems, iNVent brings with it economies in design, supply, and installation. The iNVent systems simplifies the electrical wiring requirements and greatly reduces on site labour time thereby reducing associated clients costs. iNVent system key features:
|
Monodraught Limited
Email this company
Monodraught brochure downloads
|
||||||||||||||||||||||||||||||||||||||||
Request information:
