Kingspan Industrial Insulation - High Performance Insulation
CFC / HCFC Free Zero Ozone Depletion Potential ODP - High Performance Insulation - Rigid polyisocyanurate Insulation - PIR
Kingspan Industrial Insulation Ltd are market leading manufacturers of premium performance pipe insulation products and systems.
Kingspan Industrial Insulation products are the thinnest and most efficient products commonly available for the insulation of pipework in Building Services / HVAC, process and petrochemical applications and refrigeration services – saving energy, saving CO2 emissions and saving money.
Kooltherm®FM Pipe Insulation
Kooltherm® FM Pipe Insulation comprises sections of Kooltherm® FM Insulation faced with a factory-applied foil vapour barrier jacket in silver or black, autohesively bonded to the insulation core during manufacture.
Kooltherm® FM Pipe Insulation is CE Marked in accordance with BS EN 14314 and is available in a range of thicknesses to suit different performance specifications and may be used on mild steel, stainless steel, carbon steel, copper and plastic pipework in standard and non-standard pipe diameters.
Kooltherm® FM Pipe Insulation is manufactured using state-of-the-art continuous and slotted board technologies. Both methods feature the use of a unique bore coated liner and minimise production wastage. Kooltherm® FM Pipe Insulation manufactured on the continuous process is supplied in 1 metre lengths and pipe insulation manufactured from slotted board is supplied in 1.165 metre lengths.
Kooltherm® FM Pipe insulation is available in a standard density of 37 kg/m³. Higher density pipe insulation sections and insulated pipe supports fabricated from 60 kg/m³, 80 kg/m³ and 120 kg/m³ densities are also available.
Kooltherm® FM Insulated Pipe Support Inserts
Kooltherm® Insulated Pipe Support Inserts provide optimal load bearing capacity whilst offering protection against insulation compression. Designed for use in pipe supports, hanger brackets and clamps, they will support the compressive loads imposed by horizontal pipework carrying water or other liquids.
Kooltherm® Insulated Pipe Support Inserts are available to suit a full range of pipe diameters and in a full range of insulation thicknesses; however, special sizes are available on request.
In addition to allowing a continuous vapour barrier on below ambient systems, thermal analysis of a +75°C LTHW system to EN ISO 10211:2007 has shown that Kooltherm® Insulated Pipe Support Inserts can limit heat loss by up to 4x more than rubber lined pipe clips, 5x more than metal pipe clips and 10x more than hardwood pipe support inserts.
Kooltherm® FireSleeves are a unique combination of high performance phenolic insulation, intumescent and stainless steel. These innovative products act as a 2 hour fire stop to BS EN 1366, on both steel and copper pipe service penetrations through timber frame and block wall applications, and incorporate the excellent fire and smoke performance of Kooltherm® FM Pipe Insulation.
They comprise of an outer sleeve of 0.5mm thick stainless steel which is clasp fastening and 205mm in length. It is lined with intumescent material. The stainless steel sleeve, encloses a 300mm length of Kooltherm® FM Pipe Insulation which is also lined with intumescent material. Kooltherm® FireSleeves can be supplied in a range of sizes.
Tarecpir® rigid polyisocyanurate (PIR) insulation retains all of the benefits of rigid polyurethane insulation, with a considerably increased resistance to burning and spread of flame. It is ideally suited to petrochemical, cryogenic and LNG applications.
The Tarecpur® range of rigid polyurethane (PUR) insulation has been developed to provide optimum performance with regards to insulation efficiency, compressive strength, environment, health, safety and cost. It is ideally suited to cold store / refrigeration applications.
Full technical support and literature on the application and performance of the Kingspan Industrial Insulation range is available from either the website below or by contacting us at the number below.