|
|
Conder Products Ltd
Septic tanks cesspool GRP tanks sewage treatment
Conder Products Ltd is the UK leader in
GRP tanks manufacture. Based in North-East England, we operate a
‘centre of excellence’ that integrates Europe’s largest and most
advanced manufacturing facilities with dedicated in-house sales,
technical services and specification support teams.
With over 30 years industry expertise, Conder Products is committed
to meeting customer needs through the prompt delivery of
cost-effective, innovative and high quality product solutions. We
are the only UK manufacturer with ISO 9001 Design & Build status for
all above ground and below ground GRP tanks. We also manufacture
selected product ranges to BS 4994, Cats 1,2 &3 as well as EN976 and
EN858. We hold a wide range of industry approvals, and also have our
own materials testing capability and QA laboratory.
Tanks are manufactured in standard and custom
sizes from 1-4m dia., with up to 275.000 litre capacity. Our product
choice includes separators, underground storage tanks, stormwater
balancing systems and above ground engineered storage vessels, as
well fuel tanks, sprinkler tanks, sewage treatment systems and
holding tanks.
Customer Services and Support
Led by a progressive management team, Conder Products has an
on-going and proactive investment strategy to ensure it stays ahead
of customer requirements, quality standards, pollution control and
environmental regulations. With all services under one roof, we
offer a single point of contact for customers. Telephone enquiries
are dealt with by trained personnel. Professional technical advice,
and our own AutoCAD services are always available to support
clients. From first contact, through specification, manufacture,
admin and logistics to final delivery, Conder Products aim to offer
not only market-leading products but unrivalled support and value.
Septic Tanks
Product Overview Conder Septic
tanks for sewage treatment are manufactured with two chambers, the first offering primary
settlement of wastewater and sewage, and the second allowing further
settlement before discharge of treated water, usually into a soakaway:
Key Features:
-
Available in
any diameter up to 4m and any capacity up to 275,000 litres
-
Choice of inlet/outlet pipework configurations
-
Full specification and discharge consent advice, as well as
information on environmental regulations available from the Conder
team of technical engineers
-
For full details of
the Subsoil Porosity Test required by BS 6297:1983 for soakaway
drain requirements, and for sizing details visit www conderproducts
com or call 0870 264 0004
-
BBA approved ‘Conical’ units to BS 6297 with
cylindrical baffle to minimise flow disturbance also available.
Cesspools
Product Overview
-
Designed for wastewater storage only – not
treatment
-
BSI Code of Practice 6297:1983
recommends that for full-time usage a cesspool should have a minimum
capacity of 18,000 litres or 45 days’ storage. A rate of 137 litres
per person per day is used to calculate the capacity required for
each project. However, smaller tanks may be acceptable if usage is
only part-time.
Features & Benefits
-
Standard cesspools are designed for
installation where the inlet is not more than 1 metre below finished
ground level. However, heavy duty models can be provided for deeper
inverts
-
No maintenance required other than normal
routine emptying
-
Easy to install
-
Silage tanks also available
Request information associated with Conder septic tanks cesspool GRP
tanks sewage treatment |
Email this company
Conder Products Limited
2 Whitehouse Way
South West Industrial Estate
Peterlee
County Durham
SR8 2HZ
Tel: 0870 264 0004
Fax: 0870 264 0005
sales@conderproducts.com
|
