|
Tensid UK
Ltd
Anti-graffiti coating graffiti removal uk protective
coatings
Providing solutions for our built environment
It is now 20 years since Brian Klelund, the CEO, established Tensid® as a
specialist supplier of the AGS® anti graffiti system, Prosoco building
cleaning products and Aquila pressure washing machines.
These days the name Tensid® is synonymous with high quality, effective,
environmentally responsible products, technical advice and a renowned
customer service. We also offer one day certificated AGS® anti graffiti
system training courses.
Tensid®’s progress over the years has included continuing R&D with the
introduction of new and improved products, widening our customer base both
nationally and in Europe, and the acquisition of Aquila A/S, Denmark in
2003.
A recent addition to our range of AGS® anti graffiti coatings is Nano Coat –
a revolutionary new type of high performance protection providing a gloss,
hard scratch and wear resistant surface.
New regeneration Graffi Green, the well known hard surface graffiti remover
has been improved and is now no longer classed as an irritant and is safe
for use on polycarbonate.
A new PROSOCO product has proven to be very successful – Safety Klean –
The unique green alternative for cleaning new buildings. The only effective
cleaner for masonry which does not contain hydrochloric acid.
Developed exclusively by Aquila, the hot water recycling pressure washer
enables waste water to be collected, contained and reused time after time.
Whilst safeguarding the environment, it is also invaluable where access to
water is difficult or for internal areas, railway and underground areas. It
can also be used for street cleaning during the day as there is no splashing
or excessive water. Aquila pressure washing equipment is ideal for graffiti
and gum removal, façade cleaning, paint stripping and street cleaning,
The team of experts at Tensid® are always here to help with technical advice
and support, site trials and demonstrations for our customers who include
local authorities, private contractors, London Underground and rail
operators.
AGS®
Graffi Clean 300
A viscous gel for use on masonry surfaces such as sandstone,
limestone, marble, granite, brickwork, concrete and tiles.
AGS® Graffi
Clean 400
As for Graffi Clean 300, but does not require any hazard labelling.
AGS® Graffi Ghost
For use after initial removal with Graffi Clean
300 or 400, to remove any traces of 'ghosting'
AGS® Graffi Ghost Rinse
To remove any pigment ghosting and normally used following the application of
Graffi Ghost - an acidic after rinse which will 'fizz out' remaining ghosting
whilst at the same time stabilising and neutralising the pH.
AGS® Graffi
Ghost Poultice
For deep seated ghosting on masonry, brick or concrete.
AGS® Graffi Green
A gentle, all-round liquid remover, designed
mainly for hard, non-porous surfaces such as metal, glass, tiles, polished marble,
plastic and painted surfaces. Safe for use on polycarbonate
AGS® Graffi Wipes
Special
cloth impregnated with an advanced graffiti remover - for use on graffiti made
with marker, felt and ball pen on painted, plastic and polycarbonate surfaces.
AGS® Graffi Cut
Graffi-Cut is a graffiti remover gel for hard surfaces.
Graffi-Cut removes most types of graffiti and 'ghosting' made with felt pen and
spray paint. It is ideal for use on most hard non-porous surfaces and can also
be used on other non absorbent surfaces.
Anti-graffiti protection
There are two approaches to anti-graffiti protection:
AGS® sacrificial coatings
Products, which coat surfaces and which
wash away easily with hot water only, taking graffiti with them. The product must
then be re-applied to the area which has been cleaned.
AGS®
Graffi Coat 1 ES
Strengthened version of Graffi Coat 1 for extra protection
of light-coloured and other painted surfaces sensitive to marker pens and leather
dyes.
AGS® Graffi Coat 3
For long term protection against graffiti
and fly posting, for solid surfaces and, in combination with Graffi Coat 1, For
porous absorbent surfaces.Durability of the protection is up to 10 years.
AGS®
permanent coatings
Products which coat and seal surfaces. Paint and ink
will not penetrate the coating, graffiti can be easily cleaned off using a graffiti
remover, leaving the protective coating intact. Our permenant coatings are approved
for use on London Underground and within the rail industry. Excellent performance
in fire propagation and surface spread of flame tests (copies available on request).
AGS® Grafti Coat 101
A low odour, waterborne permanent coating,
suitable for most structures where permeability is not important. Graffi Coat
101 is available in matt or gloss, clear or most British Standard colours. Graffiti
is easily removed using Graffi Green. Ideal for internal use such as stairwells
in blocks of flats.
AGS® Graffi Coat 102
Graffi Coat 102 is a one
component, moisture cured polyurethane coating.
AGS® Graffi Prime Coat
102
A single coat primer for application to masonry surfaces, prior
to application of Graffi Coat 102.
Nano Coat
Nano Coat is a single pack coating based on a polyether siloxane resin.
It is for use on hard surfaces such as cladding, stainless steel, clear
coated and anodized aluminum and painted surfaces.
AGS ®
anti graffiti system is a registered trade mark of Tensid uk ltd
Request Information: Tensid UK
anti-graffiti coating graffiti removal uk protective coatings |
