- BuildingDesign Construction Portal
  • Request Product Information

Bilco UK - Natural Smoke Vents

Natural Smoke Vents - Acoustic Smoke Vents - Natural Smoke Ventilation Maintenance

REM - SINGLE LEAF -140

Type ESW-50 Rem Smoke Vent

Bilco natural smoke and heat exhaust ventilators are manufactured to comply with all the latest regulations including the Construction Products Regulation 305/2011. All standard vents are supplied CE marked and with a Declaration of Conformity and are manufactured to meet the demands of Building Regulations, Approved Document B, BS9999 and EN12101-2.

REM - DOUBLE LEAF -90

Type UDF-50 Rem Smoke Vent

Bilco natural smoke and heat exhaust ventilators are manufactured to comply with all the latest regulations including the Construction Products Regulation 305/2011. All standard vents are supplied CE marked and with a Declaration of Conformity and are manufactured to meet the demands of Building Regulations, Approved Document B, BS9999 and EN12101-2.

SOUND RATED

Type ACDSH - Acoustical Smoke Vent

Type ACDSH smoke vents are designed to guard against noise intrusion while providing the security of automatic smoke venting. Vents feature an industry high STC 46 sound rating and are ideal for concert halls, theaters and other interior applications that require limited noise from the outside. Vents are available in steel construction and in a number of UL-Listed standard sizes.

MAINTENANCE SERVICE

Natural Smoke Ventilation Maintenance Service

Following the proper installation of your Bilco REM Smoke Ventilator, the building occupants’ safety relies on the regular maintenance of the Natural Smoke Ventilation system. Bilco UK now offers a service that allows building owners to comply with current legislation and best practices regarding smoke vent maintenance.

OPTIONS - SMOKE VENT

Control Options

Bilco controls and accessories are designed to work effectively with the range of natural smoke ventilators and roof hatches. The OS2 control unit can be a stand-alone management system - in its own right, or it can be integrated into a fully networked fire alarm or BMS system. In the event of a fire, if the mains electrical supply to the building is cut the OS2 offers a failsafe option as it incorporates a backup battery system to ensure the natural smoke vents will still open. Special control units for unique applications can also be manufactured.

Curb Option - Built-In Louvers

Bilco roof products can be supplied with louvers built into their curb. Louvers provide continuous building ventilation and are equipped with a standard insect screen. In some areas, louvers are required in vents over elevator shafts to meet elevator-shaft code requirements.

Curb Option - Curb Liner

Metal insulation liner of the same material as the curb and capflashing. Ideal for applications where aggressive adhesives or torch applied weather proofing systems are being used.

Curb Option - Fully Enclosed

Insulation liner of the same material as the curb, which replaces the capflashing. Used with hot applied roofing systems or where the hatch is welded directly to the roofing panel.

Curb Option - Fully Enclosed With Apron

Curb design allows the hatch top be easily installed on top of existing concrete, wood, or metal curbs. Ideal for situations where the roofing material is applied prior to the hatch or vent arriving on-site.

Option - Explosion Release

Bilco automatic smoke vents can be equipped to operate as explosion vents or as combination fire/explosion vents. Explosion vents are designed to limit structural damage to a building in the event of an explosion by releasing internal pressure. Explosion release mechanism is preset and factory-tested to release at between 25-30 pounds per square foot (122-146 kg/m2) of pressure on the underside of the covers.

Option - Type 316 Stainless Steel Hardware

For installation in highly corrosive environments or when prolonged exposure to hot water or steam is anticipated, all Bilco products are available with Type 316 stainless steel hardware throughout (standard on type J-AL floor doors). Included are all parts of the latch and lifting mechanism assemblies; hold-open and guide arm and guides; and all brackets, hinges, pins and fasteners.

Bilco UK Logo

Request Bilco UK Info

Bilco UK Ltd
Park Farm Business Centre
Fornham St Genevieve
Bury St Edmunds
Suffolk
IP28 6TS

Email Bilco

Tel: 01284 701696
Fax: 01284 702531

Request Information From Bilco UK - for UK and Europe only

  • *Full Name
  • *Company Name
  • *Telephone
  • *Email
  • *Enter Short Description of Your Requirements
  • *Please enter numbers shown for validation purposes