|
Floor Safe
Non slip floor coatings non slip bath
Specialists in Non-slip floor treatments and
coatings.
The UK's leading company in slip injury prevention.
The law requires that floors must not be slippery
so they put people's safety at risk, even when wet. HSE statistics
suggest that most slips occur when floor surfaces are contaminated
(water, spillage's etc.). The Workplace (Health, Safety and Welfare)
Regulations 1992 says "Every floor ... and the surface of every
traffic route in a workplace shall be
suitable for the purpose for
which it is used [and] shall [not] be ... slippery so as
to expose
any person to a risk to his health or safety." We also provide
a fully comprehensive
Pendulum Slip Test (The only test used in a court of law)
We have the most advanced range of non slip floor
solutions that guarantee to solve any slip concerns you may have.
You wouldn't have to replace the floor and we can improve the slip
resistance of your existing floor without compromising the
aesthetics. Our transparent anti slip floor treatments or coatings
can be applied out of hours and in most cases the floor can be put
back to use immediately - which means: No down time, No loss of
revenue and No more worries. Average application time is 30 minutes
per 25 sq mtrs (250 sq feet.)
If you are concerned about how slippery your floor
is when wet and worried you might get sued if somebody slips over;
Or you are an: Architect, Facilities, Operations, or H & S personnel
looking to reduce slip injury; Or you are currently involved with a
project and part of the specification is to provide a non slip
treatment to meet the HSE level of slip resistance then please
telephone us on 0845 643 1317.
The application of non slip treatments is a
specialist job. We provide a nationwide service and can guarantee
all of our operatives have been fully trained to provide you with
the best service and advise.
Stone or Tiled Floors
Tiled floors cause the majority of slip issues.
Our non / anti slip treatment creates micro suction cups under the
surface. This is not an ugly coating or a paint with bits in, It's a
clear liquid that looks like water being poured over the surface and
best of all it doesn't visibly alter the tile but when the tile
becomes wet, the water is squeezed out from the pressure of a foot
and the suction cups act like a vacuum on the sole of the shoe
creating a grip that feels as safe in the wet as in the dry.
It's the perfect application for any tiled area. This product is suitable for
the following floor types: Ceramic Porcelain Concrete Terrazzo
Quarry Marble Enamel
Anti slip treatments for baths
Invisible anti-slip protection for metal bathtubs
- within 5 minutes your bath can feel as safe in wet as in the dry.

What it does: Creates an invisible
microscopic pattern in the surface. How it works: Chemical
reacts with the silica in the enamel and makes a vacuum effect under
the surface - when wet these suction cups act as a vacuum sucking
the foot to the floor.
-
does away with ugly bath mats
-
long lasting slip and fall protection in
bathtubs & shower
-
simple to apply yourself
-
helps reduce the chance of slipping
-
enamel and porcelain bathtubs
-
cost effective
This simple process will increase the slip
resistance to reduce the chance of slip injury and will typically
last for up to 3 years. The surface can be put back into use
immediately. Average application time is 10 minutes per bath from
start to finish. Order Direct 0845 643 1317: (Supplied
in 100 ml bottles to cover one UK standard size adult bath tub).
E-mail Floor Safe and you will receive a price back within 30
minutes for anti slip bath treatment. (Just tell us how many you
need - we'll beat any other price)
Wooden or Laminate Floors
The perfect application for wooden or Laminate
areas that could cause a slip issue when wet. Independently tested
by Satra it has slip rating of 50 PTV (Pendulum Slip Value) in the
wet! well above the 36 PTV required by HSE to show due diligence and
will bring the floor in to a "Low Risk for slip potential". Long
lasting, low odour & colourless it has also been tested to:
BS7976-2 standard, meeting the H&S guidelines
introduced to ensure floors have a safe level of slip resistance,
where there is the risk of water spillage. Suitable for: Bars
Restaurants School Halls Shops
Non Slip Flooring Coatings / Non Slip Floor Paint
This is an application that will take away the
slipperiness by adding a durable anti slip coating. Our anti slip
coatings come in three different grades depending on the slip issue.
Polish without micro girt - Polish encapsulating micro grit or a
water based resin that encapsulates micro grit. These anti -slip
coatings will significantly increase the surface friction to meet
and exceed the HSE Minimum requirement.
Applications for anti-slip floor paints
are suitable for: Laminates Warehouse Floors Factory
Floors Lino VCT Wood Decking
Pendulum Slip Testing
This Pendulum test can be used to accurately test
the slip potential on clean, dry or contaminated floors and works in
wet conditions as it generates a similar fluid film between the
floor and the slider. The Health & Safety Executive (HSE) prefer
this method of testing as it is portable and works in the conditions
that slip accidents happen.
We are able to provide Pendulum Slip Testing for
the following floor types: Granite Slate Marble Limestone
Terrazzo Quarry Tiles Porcelain Ceramics Concrete Wood
Decking Vinyl VCT Laminates
Request information:
Floor Safe non slip floor coatings non slip bath
|